Register your key
No admin key is registered yet. Enter the bootstrap code and register your YubiKey / passkey. This is a one-time step.
Sign in
Tap your YubiKey to unlock the provisioner.
Dongle
Plug a dongle into this machine and click Connect Dongle. One prompt, one permission — every feature below (read, provision, flash) works off the same port.
Provision / re-image
Keep the same serial to change the seat cap (keeps seats used). Use a new serial to re-image for a new site (resets the count). Each change is signed with your root key.
Flash firmware
Reflashes the dongle you connected above — no separate connect step. Uses the current BCCS baseline shipped with this dashboard (/firmware/bccs-dongle-baseline.bin). If the running firmware crashed and won't respond, hold BOOT while pressing RESET on the dongle first to force the ROM bootloader, then click Flash.
Custom upload (advanced): ONE merged .bin flashes at offset 0. OR THREE files — bootloader.bin, partition-table.bin, app image — flash at 0x0 / 0x8000 / 0x10000.
Custom firmware upload (advanced)
Provisioned dongles
| Label | Site | Serial | Seats | Device key |
|---|